torque accessories

7 TYPES OF ACCESSORY


accessoire-1 Pivot knob
accessoire-2 Standard ratchett
accessoire-3 Compact ratchet
accessoire-4 Square drive
accessoire-5 Open end
accessoire-6 Ring end
accessoire-7 Crowfoot end

Wrench fitted with a ratchet J.372, a knob S.305P and a socket.

hand-accessorie

3 types of end fitting

type attachement

safety of end fittings

When the wrench releases, the torque accessories are subjected to severe shocks that can cause them to fail after a certain number of cycles.

The diagram below shows the number of cycles not to be exceeded according to the applied torque. The accessory must be replaced before reaching the maximum number of cycles.

courbes embout dynamo

torque controller

EASY TORQUE CONTROL FOR ALL!

e.2000

Simple and fast

  • Easy to use device with minimum settings to avoid errors. For testing wrenches before use.

Wide torque range

  • 3 devices covering a wide torque range from 2 to 1000 Nm.

Safe

  • No risk of bad reading by the operator: limit value and tolerance can be preset, indication by orange, green, red LED. RS232 output for traceability.